|Name:||QL-120G/300G Relative Density And Concentration Tester For Liquid,||Display::||Liquid Crystal|
|Density Precision::||0.0001 G/cm3 / 0.001 G/cm3||Interface:::||RS-232|
|Measuring Range::||0.001g-120g / 0.01g-300g|
infrared digital thermometer,
infrared laser thermometer
Multifunction Solid Density Meter, Liquid Density Meter
Suitable for: Rubber, Plastic, Film, Electric wire, Glass industry, Liquid, Adding additives, New materials research lab.
According to ASTM,JIS,GB/T,ISO standards, adopting the buoyancy method and the water displacement method of Archimedean principle, can accurately and directly measure the value.
1. QL-300S Solid And Lquid Densitometer has the function of showing mixture proportion, for the new materials research and the choice of mixture proportion, can directly show the proportion value.
2. QL-300S Solid And Lquid Densitometer has the function of upper limit and lower limit, can judge whether the density of the sample is appropriate or not.
3. The measuring is fast, shortening the waste of time.
4. QL-300S Solid And Lquid Densitometer has the RS-232C interface, can easily connect to the PC and the printer.
5. QL-300S Solid And Lquid Densitometer adopts design of tank (the maximum dimension of the sample is D100*W70*H25mm for solid measuring), this can decrease the inaccuracy caused by supporting wire’s buoyancy.
6. QL-300S Solid And Lquid Densitometer has the liquid model, and the optional equipment can be purchased. It can satisfy the testing of solid and liquid.
|Test Category:||Solid, Pellet, Film, Floating-body, Liquid|
|The maximum weight:||300g|
|Density Precision:||0.001 g/cm3|
|Density Range:||>1,<1 both can be measured|
|Display Value:||Density, Volume|
Setting of Temperature and
|Can set freely|
|Density setting of high and low limit||Can set the high limit and low limit of density|
|Model of liquid density||The range of liquid density:||0.000~ ∞|
|Precision of liquid density:||0.001 g/cm3|
|Mixture density||Function:||The mixture proportion of two mixtures|
|Values showed:||The proportion and density of main materials|
|Upper limit and lower limit:||
It shows “Hi” when the value is > upper limit,
shows “Lo” when < lower limit
|Setting:||Can set the density of different mixtures|
Contact Person: Sharrie Chen