Send Message
Home ProductsPackage Testing Equipment

1 T Clamping Force PLC Control Package Testing Equipment For Clamp Compression Testing

Certification
China Dongguan Liyi Environmental Technology Co., Ltd. certification
China Dongguan Liyi Environmental Technology Co., Ltd. certification
Customer Reviews
We`ve received machines yesterday!It was great to work with you! In attachment the thank-you letter for you and youк boss, that was signed by my CEO.

—— Барабан Григорий

We have had a good look at the glossmeter & we like what we see. The results are respectably close to specification calibration. We love it.

—— Dave Brewer

We have received the machine, thank you for being patient with me during this time, I haven't use it yet, but I am sure that it will be okay.

—— Jose Zikasky

I love your customer service, quickly response and being thoughtful all the time. The machine delivered on time. Thank you.

—— Elizebath Roberts

I'm Online Chat Now

1 T Clamping Force PLC Control Package Testing Equipment For Clamp Compression Testing

1 T Clamping Force PLC Control Package Testing Equipment For Clamp Compression Testing
1 T Clamping Force PLC Control Package Testing Equipment For Clamp Compression Testing 1 T Clamping Force PLC Control Package Testing Equipment For Clamp Compression Testing

Large Image :  1 T Clamping Force PLC Control Package Testing Equipment For Clamp Compression Testing

Product Details:
Place of Origin: Guangdong, China
Brand Name: LY
Certification: ISO 9001: 2008
Model Number: LY-C01
Payment & Shipping Terms:
Minimum Order Quantity: 1 Piece
Price: Negotiable
Packaging Details: Standard Wooden Case
Delivery Time: 15 days after receive the deposit
Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability: 100 Piece per Month

1 T Clamping Force PLC Control Package Testing Equipment For Clamp Compression Testing

Description
Clamping Force: 1T Color: Optional
Resolution: 1/100,000 Test Space(L X W X H): 100x 100 X 100cm
Test Speed: 10±3mm/min Weight:  around 300kg
High Light:

leakage testing equipment

,

bursting strength tester

1 T Clamping Force Package Testing Equipment For Clamp Compression Testing 

 

Clamp Compression Testing Method of Large Products

 

1.Before placing the packaged product between platens, verify that the clamp force using the clamp indicator. The indicator should be placed between the axes of the platen articulation points approximately 1/2 way up the platens.

 

2.Each time the product is clamped, the force should be applied for a minimum of 15 seconds and not to exceed 1 minute.

 

3. This Equipment applies the clamp force on the sample with the platens resting on the floor and the front edge of the platens flush with the front of the package. If the package is too large for the clamps to be flush to front edge (i.e., large refrigerator, tractor etc.), clamp as close to the edge as possible.

 

4. Clamp the product a total of 10 times in the flush orientation.

 

5. Apply the clamp force on the packaged product with the platens in a 6×6 inch(15.2x15.2cm) offset position. Both the horizontal and vertical offset dimensions are measured at the front bottom corner of the platen. If the package is too large for the clamp to be positioned 6-inches from the front edge (i.e., large refrigerator, tractor etc.), clamp as close to this position as possible.

 

 6. Clamp the product a total of 10 times with the clamp in the 6 x6 inch offset position.

 

 7. Repeat step 5 except with a 2 x6 inch offset clamp position. The 2 x6 inch offset is similar to the 6 x6 inch offset except the platens are oriented such that they are 2-inches from the floor and 6-inches back from the package’s front edge. If the package is too large for the clamps to be positioned 2-inches from the front edge (i.e., large refrigerator, tractor etc.), clamp as close to this position as possible.

 

8. Repeat flush and offset clamping on all other sides of the product that are indicated in the handling graphics as acceptable for clamp handling.

 

According to verdict standards, if there is one item failed the test, then put forward the “Test Failure Handling Sheet"

 

Techinical Parameters For Large Product

 

Clamping force

1T

color

optional

Resolution

1/100,000

Test Space(L x W x H)

100x 100 x 100cm

Test Speed

10±3mm/min

Weight

 around 300kg

Power

1#, 220V/50HZ

 

 

Safety protection

Overload protection, overvoltage protection & limited position protection device  

 

  

Clamp Compression Testing Method of Small Products

Before clamp testing, verify that the clamp for using the clamp force indicator. The indicator should be placed between the axes of the platen articulation points approximately 1/2 way up the platens.

During clamp compression testing of small products, 4 samples will be utilized as outlined below.

 

1. When oriented for clamp testing (based on the handling graphics) the sides perpendicular to the platens of a single sample ≤ 24” (61cm), then the 4 sample should be placed in a”side by side”oritentation (with 2 samples on the bottom and 2 on the top)

 

2.  If, when oriented for clamp testing the sides perpendicular to the platens of a single sample are >24” (61cm),, then the 4 samples should be placed in a top-bottom orientation. If, when placed 4-high, any of the samples are completely above the top of the platens, that sample can be removed from clamping in this orientation only

 

3 Each time the samples are clamped, the force should be applied for a minimum of 15 seconds and not to exceed 1 minute.

 

4 .Apply the clamp force on the samples with the platens resting on the floor and the samples flush with the front edge of the platens. If the samples are too large for the clamps to be flush to front edge, clamp as close to the edge as possible.

 

5.Clamp the product a total of 10times with the clamps in the flush orientation.

 

6.ASTM D6055 PLC Control Package Compression Testing MachineApply the clamp force on the packaged product with the platens in a 2×2 inch offset position. Both the horizontal and vertical offset dimensions are measured at the front bottom corner of the platen. If the package is too large for the clamps to be positioned 2-inches from the front edge, clamp as close to this position as possible.

 

7. Clamp the product a total of 10 times with the clamps in the offset position.

 

8. Repeat the flush and 2x2 inch offset camping on all other sides of the product that are identified in the handling graphics as acceptable for clamp handling. Please note, depending on the box geometry, you may use both the side-by-side and top-bottom orientation during clamp testing.

 

Techinical Parameters for Small Product

Clamping force:

50-3000kg

Size of the clamping board:

1200 by 1200mm

Maximum clamping space:

1200 by 1200 by 1200mm

Minimum clamping space:

400 by 1200 by 1200mm

Clamping speed:

5-50mm/min

Up-down space:

100-600mm, adjustable, can be customized

Dimension: 3

810 by 1900 by 2100

Weight:

800kg

Power:

380v/ 50Hz

Control system:

PLC programmed control

 

 Photo Refernce

1 T Clamping Force PLC Control Package Testing Equipment For Clamp Compression Testing 0

 

Contact Details
Dongguan Liyi Environmental Technology Co., Ltd.

Contact Person: Victoria Li

Tel: +8613809275028

Fax: 86-769-28682030

Send your inquiry directly to us (0 / 3000)