|Material:||SUS 304# Stainless Steel||Power:||220V Or 380V AC±10% 50Hz|
|Inner Size:||50*60*50 (cm)||Color:||White|
|Inside Material:||Stainless Steel SUS 304 #||Temperature Range:||-40 ~ +150℃,-20~150C|
constant temperature and humidity chamber,
stability test chamber
Humidity High And Low Temperature Test Chamber Stainless Steel Cyclic Damp
It can simulate different environment condition. It's appropria-te for testing material performance, such as resist heat, resist dry,resist humidity and resist cold. That can define perform-ance of material.
GB/T2423/5170/10586, JIS C60068, ASTM D4714, CNS3625/12565/12566
1. Use the high precision microcomputer touch temperature and humidity controller with high stability of platinum resistan-ce to temperature and wind speed in the circulatory system of temperature and humidity test.
2. Control temperature&humidity well-distributed, precisely and steady.
3. Completely independent system separate for testing in high temperature, low temperature and constant temperature & humidity environment.
|Volume (V)||80 L||150L||225L||408L||800L|
|Temp and Hum Range||
A:-20°C~150°C B: -40°C~150°C C: -60°C~150°C D: -70°C~150°C
|Deviation||±0.5°C-±2°C ±3%RH(>75%RH); ±5%RH(≤75%RH)|
|Material||Inner Wall||#SUS 304 Stainless steel|
|Outer Skin||#SUS 304 Stainless steel|
High temperature resistant,
high chlorine acid b vinegar foam insulation materials
|Wind Cycling Way||Centrifugal fan-broadband type forced air circulation|
|Refrigeration Way||Single stage compression refrigeration|
|Refrigerants||R4O4A USA Dupont environmental protection refrigerant(R23+R404)|
|Condensing Way||Air-cooled or water-cooled|
|Heater||Nickel chrome heating wire heater|
|Humidifier||Semi-closed steam and wet|
|Water Suplying Way||Automatic cycling water supply|
1 Observe window(double-deck cavity toughened glass),
1 50mm test hole in the left,
1 PL inner chamber lamp,
1 bag of wet and dry bulb,
1 power line.
Non- fuse-switch(compressor overload,
refrigerant high low voltage,
over-humidity and temperature protection,
Protection switch,fuse stoppage warning system
LIYI INTERNATIONAL is a professional manufacturer of various kinds of testing equipments over 12 years. LIYI products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and applicable to all scientific research units, quality inspection institutions and academic fields.
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation manual. We can provide video-con.
1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.
2.Excellent After sale Service:
12 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller.
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
Contact Person: Sharrie Chen