|Temperature Range:||Normal Temperature~ 200°C||Heating Time:||(5±2)°C/min|
|Interior Box:||W40*H40*D45cm||Outside Box:||W65*H92*D53cm|
material testing equipment,
material testing machine
Laboratory Equipment Battery Simulated Low Pressure Testing Machine
The temperature rises at the predetermined rate to the testing temperature and hold on for some time. Use the hot wind circle to ensure the uniformity of the working temperature.
The battery thermal shock testing Method: Put the battery sample into the test box with the original temperature of 20±5℃ , then rise the temperature to 130±2℃ at the rate of (5±2℃) per minute. Keep the temperature for 10 min. The battery is qualified if no fire or explosion.
The battery thermal shock testing Standard:UN38.3,UL1642,UL2054,GB 8897.4-2002,IEC60086-4 ,GB31241,SN/T1414, SN/T1413 , YD1628, GJB2374, QB/T2052,IEC62133-2012, SAE-J2464,GB31241
|Temperature Range||RT to 200°C|
|Rising time||(5±2)°C/min, average heating, nonlinearity no-load|
|Temperature-controlled meter||Programmable temperature controller|
|Insulation material||Efficient compression glass wool|
|Insulation devices||No fuse switch and overtemperature protection switch, fuse|
|Stop control||Stop with buzzing alarm.|
|Air circulation system||Convection air supply system|
|Control system||The timers start timing once the predetermined temperature is reached. The power would be cut off when the predetermined is reached.|
|Exhaust pipe||Vane design|
|Interior box material||Stainless steel|
|Outside box material||Cold-roll steel sheets with baking varnish|
|Safety device||Over-temperature alarm, MCCB overload protection|
LIYI INTERNATIONAL is a professional manufacturer of various kinds of testing equipments over 12 years.
LIYI products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and applicable to all scientific research units, quality inspection institutions and academic fields.
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation manual. We can provide video-con.
1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.
2.Excellent After sale Service:
12 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller.
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
Contact Person: Karen Yu