company news about Structural Characteristics Of High And Low Temperature Test Chamber And Some Safety Information During Use

Structural Characteristics Of High And Low Temperature Test Chamber And Some Safety Information During Use

Structural characteristics of high and low temperature test chamber:

The shape is beautiful and generous, and the non reaction handle is adopted, which is easy to operate.

The inner tank of the box adopts imported high-grade stainless steel (SUS304) mirror panel, and the outer tank of the box adopts A3 steel plate plastic spraying, which increases the appearance texture and cleanliness.

The large observation window is equipped with a lighting lamp to keep the box bright, and the embedded tempered glass in the heating body is used to clearly observe the situation in the box at any time.

The left side of the box is equipped with a test hole with a diameter of 50mm, which can be used for external test power line or signal line.

Safety information to be paid attention to when using high and low temperature test chamber

1. High temperature scald

The temperature in the high and low temperature test chamber is very high during the high temperature test. During or just after the test, if it is necessary to open the box door, be careful to avoid scalding.

When the refrigerator is working, the temperature of the exhaust copper pipe is very high. Do not touch it during operation to avoid scalding.

2. Low temperature frostbite

The temperature in the high and low temperature test chamber is very low during the low temperature test. During or just after the test, if it is necessary to open the box door, special care shall be taken to avoid frostbite.

3. Electric shock

Although the equipment has sound anti electric shock measures, it still needs attention, especially the electrical control system. Do not touch the electrical part under working conditions.

Installation safety information:

1. Power supply

The power supply of high and low temperature test chamber adopts three-phase five wire system, and the equipment cable is four core wire, three phase wires and one zero wire. Please distinguish between zero lines. Because part of the load of the equipment and the control system are single-phase, the wrong neutral line will lead to the equipment inoperative and damaged.

The grounding wire of the equipment is equipped with grounding wire post. Ensuring good grounding of the equipment can make the equipment safe and reliable. The wrong connection of zero line and ground wire will lead to abnormal operation of the equipment.

If the cable needs to be extended due to the user's site and other factors, please ensure that the rated parameters of the extension cable and power supply can meet the power demand of the product.

2. Site

This equipment will generate a lot of heat during use. Please install the equipment in a well ventilated place.

Do not use this equipment near flammable materials or explosive environment.

Do not use in strong magnetic field and strong vibration environment.

Use safety information

Do not connect the test object power supply to the equipment power supply, otherwise the equipment power load will be increased. Unless the test object power interface is reserved for the equipment.

It is strictly prohibited to test inflammable, explosive, highly corrosive and strong radiation articles.