|Instrument Model:||NDJ||Display Mode:||Liquid-crystal Display|
|Rotor:||1#、2#、3#、4#||Sample Size Required For Each Measurement:||250 – 400ml|
|Viscosity Display Accuracy:||0.01mPa.S||Measurement Error:||±3% (Newtonian Liquid)|
|Repetitive Error:||±1.5% （Newtonian Liquid)||Sample Amount:||18ml （Each Measurement Required）|
|Working Power Supply:||110V / 60Hz，220V / 50Hz||Outline Dimension:||300 × 300 × 450(mm)|
adhesive test equipment,
adhesion testing equipment
LIYI Brand Digital Viscosity meter For Lab Use With Accuracy 0.01mPa.S
NDJ series digital rotary viscosity operation is more convenient, more accurate value measurement, more complete functions
1. With LCD backlight display, program setting, automatic control, timing measurement, automatic scanning, error alarm and other functions. The screen shows the viscosity, temperature, timing measurement time, speed, rotor number, percent ratio, torque range of measurement to the viscosity and other information.
2. The full range viscometer and the block linearity all through the computer interface with the standard silicone oil measurement correction, to ensure that the instrument has high sensitivity, high precision, high repetition. The measured data is accurate and reliable, with good reproducibility.
3. The apparent viscosity of absolute viscosity or non Newton type liquid SNB series digital viscometer can be measured. The Newton type liquid viscometer data processing software can be summarized for rheological properties of non Newton liquid.
Widely used in grease, paint, paint, textile, food, slurry, medicine, cosmetics and other adhesives, fluid, semi fluid production industry and scientific research units.
1. Measurement data direct LCD screen display does not require two calculations
2. Using the latest international microcomputer drive technology, import stepper motor, accurate speed, smooth and reliable
3. The use of advanced switching power supply technology, voltage and frequency range wide, power fluctuations will not affect measurement accuracy
3. The Level display device is very convenient on the front of the viscometer
5. All ranges, the display accuracy of viscosity value is accurate to two decimal places, that is, 0.01mPa.S.
6. With the function of timing measurement, it is very useful for detecting non Newtonian liquid
7. Using small sample adapters, the amount of sample required for each measurement is very small, 18ml.
8. Automatic scanning function, the instrument can automatically recommend the best combination of rotor and speed
9. Automatically display the maximum range of viscosity that the selected combination can measure
10. With a print interface, you can directly connect to play micro printing machine, print a variety of data
11. Optional data processing software, can record real-time viscosity with time, speed or rotor (shear rate), temperature changes vary, which provides a good method to understand the viscosity and rheological properties of non Newtonian liquids.
Detailed technical parameters:
|display mode||liquid-crystal display|
|speed (r/min)||6 / 12 / 30 / 60||
The 0# rotor is optional, for measuring ultra low viscosity below 15
|Sample size required for each measurement||250 – 400ml|
|Viscosity display accuracy||0.01mPa.S|
|measurement error||±3% (Newtonian liquid)|
|repetitive error||±1.5% (Newtonian liquid)|
|sample amount||18ml (Each measurement required)|
|Timing measurement function||standard configuration|
|temperature measurement||standard configuration|
|Measurement range display||Can automatically display the maximum viscosity of composite rotor and speed of the selected measurement value|
|Constant temperature component||Option (special viscometer constant temperature bath, constant temperature cup, temperature probe, etc.)|
|data output interface||standard configuration|
|Data processing software||option|
|working power supply||110V / 60Hz,220V / 50Hz|
|outline dimension||300 × 300 × 450(mm)|
|2||#1,#2,#3 and #4rotors||1 group (, #0 rotor is for option)|
|3||Power adapter||1 set|
|4||Rotor protection frame||1|
|6||Rise and fall pillar||1|
1. ultra low viscosity adapter (0# rotor)
A set of three pieces (rotor, sample bucket,connecting frame) Used to measure ultra-low viscosity samples below 15mPa.S. The amount of sample required for each
measurement is 18-20ml. The accuracy of measurement is 0.1mPa.S
2. Temperature probe (temperature sensor)
High precision temperature measuring chip with A/D conversion
Measuring range: 0 - 100
Measurement accuracy: 0.1
3. Micro thermal printer
Can be directly connected with the viscometer
4. Viscometer special thermostatic bath
Temperature range: -5 to 100
Temperature control precision: 0.1
5. Viscometer special thermostatic bath
Temperature control range: room temperature
plus 10 degrees Celsius to 100 degrees C
Temperature control precision: 0.1
The circular opening can be placed 200ml beaker, direct
measurement of viscosity. The outer loop has the function
of constant temperature cup can also be controlled constant
temperature liquid lead to external, to meet different test
LIYI INTERNATIONAL is a professional manufacturer of various kinds of testing equipments over 15 years. LIYI products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and applicable to all scientific research units, quality inspection institutions and academic fields.
During the whole business process, we offer Consultative Selling service.
Customer inquiry process:
Discussing testing requirements and technic details, suggested suitable products to customer to confirm. Then quote most suitable price according to customer requirements.
Specifications customize process:
Drawing related drawings to confirm with customer for customized requirements. Offer reference photoes to show the proucts appearance. Then, confirm the final solution and confirm final price with customer.
We offer below business term:
|Accepted Delivery Terms:||FOB, CFR, CIF, EXW, DDP|
|Accepted Payment Currency:||USD, EUR, HKD, CNY|
|Accepted Payment Type:||T/T, L/C, Credit Card, PayPal, Western Union, Cash, Escrow|
|Nearest Port:||Shenzhen, Guangzhou, Shanghai, Qingdao, Tianjing or rquired|
Production and delivery process:
We will produce the machines according to confirmed PO requirements. Offering photoes to show production process.
After finish production, offer photoes to customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.
Deliver the products in confirmed shipping time and inform customer.
Installation and after sale service:
Defines installing those products in the field and providing after-sales support.
Contact Person: Sharrie Chen