|Model:||LY-RR||Usage:||Plastic Testing Machine|
|Temperature:||450℃||Temperature Accuracy:||±0.2 ℃|
|Machine Size:||250*510*350mm||Pistons Parameters:||Piston Head:9.475+-0.015mm|
|Piston Length:||H=6.35±0.1mm||Paramters:||Extrusion Hole 1=2.095±0.005mm|
|Temperature Recovery Time:||Less Than 4||Power:||AC220V±10% 50HZ|
material testing equipment,
material testing machine
CD MFI Rapid Heating Plastic Melt Flow Rate Meter Instrument Equipment
This Instrument can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined.
It's is a high precise melt testing instruments for the measurement of melt flow rate (MFR)/(MI) and melt volume rate (MVR) in quality control and research applications.
It's suitable to measure melt flow character of PP, PE, POM, ABS plastics and plastic productions, widely used in factories, products quality testing station, scientific and research institutes, and concerned industries.
|Barrel parameters||Inner hole 9.55±0.025mm|
|Pistons parameters||Piston head: 9.475±0.015mm|
|Paramters||Extrusion hole 1=2.095±0.005mm|
With intelligent temperature control instrument,
with four pairs of significant temperature setting
control, PID parameters can be automatically set,
precision up to ± 0.1 degree centigrade
|Temperature accuracyblade to jawand dust collector||±0.2 ℃|
|Maximum comsuption||< 600W|
|Temperature recovery time||less than 4 min.|
0.325kg, 1.2kg, 2.16kg, 3.8kg, 5.kg, 10.0kg, 12.kg,
|Loop distance from up and down||30mm|
|Control precision||± 0.1mm|
|Test flow control|
|Times of cutting the material||0~10 times|
|Material cutting interval||0~999s(set reference Table 2)|
|Control flow reaches the set temperature without volatility|
|Barrel temperature time||15 min.|
|Material be installed||1 min|
|Material sample temperature recovery time||4 min.|
|When binder set||1min|
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation manual. We can provide video-con.
1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 380V, insurance indicator.
2.Excellent After sale Service:
12 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller.
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
1. Multi-segment (five-stage) temperature control mode, five sets of platinum resistance sensors, five heating sets separately controlled temperature, high-precision intelligent PID control, the heating slope is adjustable.
2.Temperature resolution of 0.1 ℃, the temperature uniformity of 0.2 ℃, the temperature fluctuation of not more than 0.5 ℃ within 24 hours, the displacement sensor resolution is 0.001 mm
3.Over-temperature protection device.
4. High precision of constant temperature.
5. Can fastly recover to constant temperature condition after padding.
6. Can use manual and automatical material trimming test method.
7.Touch screen controller has high precision, 7 inch touch screen, can be stored and print out the last 50 (or group) 20 test conditions and data, .Reserved RS232 interface or USB interface to connect computers, can will instrument operation and test data transmission through computer control to save on the computer
How to Contact Us?
Please Send your inquiry Details in the below for our quotation,Click "Contact Now" !
Contact Person: Victoria Li
Tel: +86 13929216856