|
Product Details:
|
| Model: | LY-RR | Usage: | Plastic Testing Machine |
|---|---|---|---|
| Temperature: | 400℃ | Temperature Accuracy: | ±0.2 ℃ |
| Machine Size: | 250*510*350mm | Pistons Parameters: | Piston Head:9.475+-0.015mm |
| Piston Length: | H=6.35±0.1mm | Paramters: | Extrusion Hole 1=2.095±0.005mm |
| Temperature Recovery Time: | Less Than 4 Minutes | Power: | AC220V±10% 50HZ |
| Highlight: | impact test equipment,material testing machine |
||
White Color Melt Flow Index Machine , Point Load Melt Flow Index Tester Equipment
Gold Brand Melt Flow Index Tester Uses:
This machine applies to both molten high temperature of the PE, gather fang PSF, fluorine plastic, nylon engineering plastic, also suitable for polyethylene, polypropylene polystyrene, ABS resin, pom resins melting temperature lower plastic tests.
Gold Brand Melt Flow Index Tester Meet the standards:
ASTM D 1238, ISO1133, GB/T3682
Gold Brand Melt Flow Index Tester Characteristic:
1.Using advanced electronic measurement technology, liquid crystal display test results, the micro printer output results and calculating the quality of the melt flow rate (MFR) or melt volume flow rate (MVR) (note: single determination value and many times the average of the cutting material).
2.Tester compact structure, beautiful, the control system can real time measurement and display temperature numerical, has the upper limit temperature protection, constant temperature sound reminders, response time tip etc. Function. The use of advanced PID control technology and high speed and high resolution sampling circuit, make the machine in constant temperature is the following characteristics:
A: heating speed, the dinky overshoot.
B: constant temperature and high precision.
C: in the packing after, can quickly restored constant temperature condition.
Gold Brand Melt Flow Index Tester Specifications:
| Medel: | LY-RR-1221 |
| Testing method: | Quality method, volume method |
| Display: | Liquid crystal display |
| Time precision: | 0.01S |
| Cut material way: | Automatic sample cut |
| Temperature range: | 100~450°C |
| Controll accuracy: | ±0.5°C or better |
| Testing range: | 1.0~100g/10min,0.01~350cm³/10min |
| Recovery time: | <4min |
| Loading method: | Manually loading |
| Displacement measurement accuracy: | ±0.1mm |
| Temperature resolution: | 0.1°C |
| Power: | (220-15%~220+10%)VAC 50Hz 500W Single phase three line |
| Output: | Micro printer |
Contact Person: Victoria Li
Tel: +8613809275028
Fax: 86-769-28682030
