|Max loading:||100KN (can Be Customized)||Accuracy degree:||Better Than 1 grade|
|Effective force testing range:||0.2%~100%||Force accuracy:||Within ±1 of the Value|
|Effective testing width Of Pipe:||650mm (can be customized)||Range of testing speed:||Servo motor speed:0.01~500mm/min|
|Measuring accuracy of displacement:||Within ±1% of the Value||System:||Computer System|
|Plastic Testing Equipment:||Plastic Pipe Stiffness Testing Equipment|
impact test equipment,
material testing machine
100KN Computer System Plastic Pipe Stiffness Testing Equipment
The Plastic Pipe Ring Stiffness Tester is widely used in thermoplastic plastic tubing with circular
cross section, and the stiffness for grass steel tube. The tester can meet the standard requirement of
PE arms bellows,winding pipe, and all kinds of tubular product standards, at the same time, can do the
tubular product ring stiffness,ring flexibility,flat,tensile test.With the function of key adjust, digital display for test force displacement, value keeping, broken automatically stop, overflow, overload automatical protection.
Be widely used in measuring and quality test: rubber plastic, metallurgy ans steel, mechanical
manufacture, electronics,car production,textile and chemical fiber,wire and cable, packing material and food,instrument, medical apparatus and instruments,civilian nuclear energy,civilian aviation,institution
of higher learning, scientific research,arbitration,technical supervision department,building material ceramic, petrochemical engineering and so on.
100KN (can be customized)
Better than 1 grade
Effective force testing range
Within ±1 of the Value
Effective testing width of pipe
650mm (can be widen according to customers’ requirement )
Effective testing diameter of pipe
3000mm (can be customized)
Range of testing speed
Servo motor speed:0.01~500mm/min
Measuring accuracy of displacement
Within ±1% of the Value
Deformation measuring accuracy
Testing bench safety device
Electronic limit protection
Testing bench return function
Manual or automatic two choices, after finishing test, can return
If overload 10% of the max loading, the machine will turn on
compression fixture( one set)
0.75KW(Equipped with different power motor, according
Ring The principle of stiffness testing machine is, the testing value and deformation value of tubular underthe constant deformation. Normally, can be used in water seepage drainage pipe,discharge pipe,
Irrigation pipe, pipe, mud, communication protection tube.
The main function:
It is suitable for testing metal and nonmetal material, such as rubber,plastic, wire cable, optical fibre
safety belt,leather belt composite, plastic material, waterproof roll,steel tube,proximate material,
bearing steel, stainless steel( and other high-duty steel),casting,steel plate,steel belt,tensile,
bending,cut, stripping,tear,two points extension( need additional extensometer.
1. The machine apply double space structure with four columns frame: Pull up and press.
2. Speed adjusting system apply servo speed adjustment system and servo motor, stable and reliable
performance, with the mechanical protection device for overcurrent,overpressure and overload.
3. The drive part apply arc synchronization cog belt, vice transmission by precision ball screw, smooth
transmission, low noise, high transmission efficiency.
4. Cardan joint apply cross bolt structure, with the function of pendulum angle limit,not only can fix the
guarantee the concentric degree of test, also can eliminate the influence for the sensor from irregular
5. Equipped with specialize ring stiffness deformation measuring device, which can help the deformation
6. can suitable for tube with φ3000mm
Contact Person: Victoria Li
Tel: +86 13929216856