|Temp and Hum Range:||A:-20°C~150°C B: -40°C~150°C C: -60°C~150°C D: -70°C~150°C RH20%-98%||Accuracy:||±0.3°C ±2.5%RH|
|Fluctuation:||±0.5°C ±2.5%RH||Deviation:||±0.5°C-±2°C ±3%RH(>75%RH); ±5%RH(≤75%RH)|
|Wind Cycling Way:||Centrifugal Fan-broadband Type Forced Air Circulation||Refrigeration Way:||Single Stage Compression Refrigeration|
|Water Suplying Way:||Automatic Cycling Water Supply||Heater:||Nickel Chrome Heating Wire Heater|
constant temperature and humidity chamber,
environmental testing chamber
LY-2800 CE Mark Climate Chamber Temperature And Humidity Test Machine From LIYI
1. The product is the best option for pharmaceutical enterprises to do medicine stability tests. It uses scientific method to create a long time stable temperature, humidity and illumination environment which medicine failure evaluation needs.
2. It is applied in pharmaceutical enterprises for acceleration test, long-term test, high- temperature test and strong light irradiation test of medicine and new drug.
1. Brand new fluoride-free design, high efficiency, low power and energy-saving.
2. Specific germicidal stainless steel chamber, semicircular arcs at corners for easy cleaning and operation.
3. digital temperature and humidity display.
4. LCD controller, all functions show in the screen as graphics and text form. Customer can observe the state of the machine through graph.
5. Guarantee of continuous operation: Two sets imported whole sealing compressor auto switch.
|Volume (V)||80 L||150L||225L||408L||800L|
|Temp and Hum Range||
A:-20°C~150°C B: -40°C~150°C C: -60°C~150°C D: -70°C~150°C
|Deviation||±0.5°C-±2°C ±3%RH(>75%RH); ±5%RH(≤75%RH)|
|Material||Inner Wall||#SUS 304 Stainless steel|
|Outer Skin||#SUS 304 Stainless steel|
High temperature resistant,
high chlorine acid b vinegar foam insulation materials
|Wind Cycling Way||Centrifugal fan-broadband type forced air circulation|
|Refrigeration Way||Single stage compression refrigeration|
|Refrigerants||R4O4A USA Dupont environmental protection refrigerant(R23+R404)|
|Condensing Way||Air-cooled or water-cooled|
|Heater||Nickel chrome heating wire heater|
|Humidifier||Semi-closed steam and wet|
|Water Suplying Way||Automatic cycling water supply|
1 Observe window(double-deck cavity toughened glass),
1 50mm test hole in the left,
1 PL inner chamber lamp,
1 bag of wet and dry bulb,
1 power line.
Non- fuse-switch(compressor overload,
refrigerant high low voltage,
over-humidity and temperature protection,
Protection switch,fuse stoppage warning system
1. Metal plate material:
The inner and outside material is SUS mirror surface corrosion resistant plate, inner chamber two sides have sample Rail frame,it has the adjustable hang strip, heat preservation and heat insulation at least 10cm with hardness polyamine foaming.
It has the high quality bakelite and glass fiber doorframe cutting off the heat conduction. Heat-proof quality is quite good,the door airtight seal strip is the two-way wide high-temperature resistance silicon foaming.
2. Test space blowing-in circulate
Mature blowing-in system use high temperature resistance multiple-blade
wind wheel which is drived by the motor,the upside blade blow the wind in and the downside return the wind. When the temperature is -70-100℃,the error will be less 2℃
3. Controller system
Use the PLC controller which is with low energy consumption
(20W),the control system accuracy is ±0.3℃.
High mark screen
5.7 inch LCD color screen with interactive parameter input method, resolution ratio is 800*480.
Big memory capacity
120 groups / 1200 section all repeatedly:maximum is 999 (can repeated
unlimited), part repeated: support maximum 99 PC-Link, MODBUS (ASCII, RTU). And has fact curve with temperature and humidity.
Convenient and fast connect the computer
Controller use R232 port,if you monitoring the history curve and need to
playback the data,you can use editing operation.
4. Heating and humidifying system
Spiral nichrome tubular electric heating element heater, High accuracy temperature fluctuation, and with long lifetime!
Use shallow slot method to humidify. Humidity measurment use wet and dry bulb method.
Over-temperature protector:(protect the sample and the chamber)
Humidifier empty burn preventer(protect the humidifier)
5. Temp & Humi. Control Range(Specific test requirements customize)
1.Choice of wind circulation way: Forced air supply
If you have requirements on wind supplying way, this kind of air supply is the best choice.
2. Choice of water supply system: RO (Reverse osmosis)
Our equipment use pure water when doing humidity test, can automatically add water to make test more convenient.
3. Polymer film/wheel dehumidification system
If you need to do low temperature and low humidity test for long time, then honeycomb chemistry dehumidifier system will be your best choice. It can make to
10℃ 10%RH or lower.
4. LN2/LCO2 fast cooling system
We offer all kinds of imported professional LN2/LCO2 solenoid valve and related controlling system to meet your requirements of fast heating and cooling.
5. Equiped with glass door and operation hand hole on the door
If you need to move or open the test sample during testing, to equip a glass door and operation hand hole to avoid effect to test condition when open the chamber door.
6. Recorder to get test data in time
If need to record different points environmental and sample temperature, to equip a temperature recorder is a best choice.
We have stoving varnish model and stainless steel model for reference...
During the whole business process, we offer Consultative Selling service.
Customer inquiry process:
Discussing testing requirements and technic details, suggested suitable products to customer to confirm. Then quote most suitable price according to customer requirements.
Specifications customize process:
Drawing related drawings to confirm with customer for customized requirements. Offer reference photos to show the products appearance. Then, confirm the final solution and confirm final price with customer.
We offer below business term:
|Accepted Delivery Terms:||FOB, CFR, CIF, EXW, DDP|
|Accepted Payment Currency:||USD, EUR, HKD, CNY|
|Accepted Payment Type:||T/T, L/C, Credit Card, PayPal, Western Union, Cash, Escrow|
|Nearest Port:||Shenzhen, Guangzhou, Shanghai, Qingdao, Tianjing or rquired|
Production and delivery process:
1. We will produce the machines according to confirmed PO requirements. Offering photoes to show production process.
After finish production, offer photoes to customer to confirm again with the machine.
2. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.Deliver the products in confirmed shipping time and inform customer.
Installation and after sale service:
Defines installing those products in the field and providing after-sales support.
1. What's the warranty?
We can provide 12 months warranty.
2.Does the power supply can customized?
YES ,if you need customized power supply,pls tell us when you put the order.
3.What's the production time?
Usually 20 days for production, some equipments need extra time to debug.
4.What's the Dlivery method ?
Light-weight cargo is usually by express , Air transport and sea shipping is acceptable (provide with safty packing)
5.What's the delivery time?
According to different method and country , express will be 6~15 days
6. How to install and operate?
According to each instruction manual which sent with equipment. ( We also provide after-sale technical support)
7.What's the payment term?
Normally 30% paid by T/T in advance and 70% paid by T/T before shipping by air.Other payment term is negotiable
Contact Person: Victoria Li