Product Details:
|
Controller Brand: | TATO | Condensing Way: | Air-cooling |
---|---|---|---|
Color: | White, Blue And No-painted | Volume: | 408L |
Inner Size(cm): | 60x85x80 | Material: | US 304# Stainless Steel |
Highlight: | constant temperature and humidity chamber,environmental testing chamber |
408L Touch Screen Laboratory Equipment Constant Temperature Humidity Climatic Test Chamber
Introduction:
Climate controlled cycling environmental temperature humidity test chamber for Lab is for testing material heat, cold, dry resistance, humidity resistance.Suitable for electronics, electrical appliances,Communications, instrumentation, vehicles, plastic products, metal, food,chemical,building materials, medical, aerospaceand other products.
Advantage of Temperature Humidity Control System Unit Test Equipment
● Small, portable, benchtop design
● Wide temperature ranges and volume selection.
● Programmable touch screen controller.
Standards:
GB/T2423/5170/10586, JIS C60068, ASTM D4714, CNS3625/12565/12566 etc.
Specifications:
Model | LY-280 | LY-2150 | LY-2225 | LY-2408 | LY-2800 | |
Inner Size W×H×D(cm) |
40×50×40 | 50×60×50 | 60×85×80 | 60×85×80 | 100×100×80 | |
Outside Size W×H×D(cm) |
93×155×95 | 100×148×106 | 117×166×91 | 140×176×101 | 170×186×111 | |
Volume (V) | 80 L | 150L | 225L | 408L | 800L | |
Temp and Hum Range |
A:-20°C~150°C B: -40°C~150°C C: -60°C~150°C D: -70°C~150°C RH20%-98% |
|||||
Function | Fluctuation | ±0.5°C ±2.5%RH | ||||
Deviation | ±0.5°C-±2°C ±3%RH(>75%RH); ±5%RH(≤75%RH) | |||||
Controller Analytical Accuracy |
±0.3°C ±2.5%RH | |||||
Wind Cycling Way | Centrifugal fan-broadband type forced air circulation | |||||
Refrigeration Way | Single stage compression refrigeration | |||||
Refrigerator | French Tecumseh | |||||
Refrigerants | R4O4A USA DuPont environmental protection refrigerant(R23+R404) | |||||
Condensing Way | Air-cooled or water-cooled | |||||
Water Supplying Way | Automatic cycling water supply | |||||
Standard Accessories |
1 Observe window(double-deck cavity toughened glass), 1 50mm test hole in the left, 1 PL inner chamber lamp, 2 clapboards, 1 bag of wet and dry bulb, 3 fuses, 1 power line. |
|||||
Safety device |
Non- fuse-switch(compressor overload, refrigerant high low voltage, over-humidity and temperature protection, Protection switch,fuse stoppage warning system |
Contact Person: Victoria Li
Tel: +8613809275028
Fax: 86-769-28682030