|
Product Details:
|
| Composite Function: | Have | Thickness Of Coated Substrate (take Pet As An Example): | ≥25μm |
|---|---|---|---|
| Maximum Unwinding Width: | 300mm | Scraper Adjustment Mode: | Manual Adjustment |
| Key Selling Points: | High-accuracy | Machine Speed: | 15m/min |
| Driven Type: | Electric | Heat Source: | Three Phase Alternating Current |
| Power Source: | 380v | Heating Mode: | Five Stage Independent Electric Heating (adjustable At Room Temperature - 200 ℃) |
| Glue Quantity: | ≥ 50g (manual Feeding) | ||
| High Light: | hot melt adhesive coating machine,380v hot melt adhesive coating machine,Five Stage hot melt coater |
||
Solvent Based Experimental Coating Tape Adhesive Manufacture Machine
Product Description:
1. The frame is made of stainless steel plate welded and precision sprayed with surface treatment;
2. The installation method of retracting and unwinding coil material adopts air expansion shaft, which is marked with scale to facilitate loading alignment;
3. Automatic and manual tension control system is adopted to control the tension of winding and unwinding;
Characteristics of cloth applicator:
1. The maximum width within the coating width is 250mm (can be customized according to customer requirements);
2. The comma scraper can be lifted and lowered rapidly through the air cylinder, which is convenient for cleaning. A stainless steel waste plate is added to ensure the cleanness of the machine;
3. The gluing pressure is controlled by precisely adjusting the air pressure;
4. The coating gap is adjusted from both sides through a small hand wheel, and the coating gap is checked with a Japanese Sanfeng dial indicator, which is more convenient, fast and accurate;
5. The clearance adjustment range of comma scraper is 0-0.18mm (customized according to customer requirements);
6. There are three kinds of coating methods, i.e. comma head, concave head and cloth head, which can be coated at any time.
(Note: it is internally defined as comma roll coating head, which is equipped as standard. If other coating methods are required, please specify)
Professionals use apparatus which clamps test strips that have been glued together and slowly pulls them apart. A machine then measures the force needed to tear the glue joint apart. This measuring principle can be reproduced by hanging progressively heavier weights on a glued test strip until the glue joint tears.
Reference Pictures:
Contact Person: Victoria Li
Tel: +86 13929216856
Fax: 86-769-28682030
