Product Details:
|
Material: | Steel | Size: | Customized |
---|---|---|---|
Temperature: | -70℃~150℃ | Humidity: | 20%~98% Customizied |
Color: | Customized | Controller: | Imported Tecumseh Compressor |
Certificate: | CE,ISO | Name: | 225L Environmental Constant Temperature Humidity Chambers With Stainless Steel Plate |
High Light: | constant temperature and humidity chamber,environmental testing chamber |
225L Environmental Constant Temperature Humidity Chambers With Stainless Steel Plate
Introduction
Temperature Humidity Chambers can simulate both temperature and humidity. Controlled humidity from 20%RH to 98%RH can be maintained within the dry-bulb temperature range of -70°C to +150°C, For lower dewpoint conditions (low RH or relative humidity at low dry-bulb temperatures), you will need dry air purge or GN2 (gaseous nitrogen) purge. See the humidity range chart on the specification page of each temperature-humidity chamber for humidity range limits.
Inspect standard:JJF-1101,GB/T 10592,GB/T 10586.
Testing standards:YD/T 2061,HB 7122.3,6783.7,GJB 5382.7,GJB 150,GB/T 2423,5170.2,5170.5,5179.2, ASTM E512,NF EN 60068-2-38,CNS 12565,12566,KS C0227,KS C022
Specification:
Material | Inner material | SUS 304# steel plate | |||
Outside material | SUS 304# steel plate(surface disposing) | ||||
Thermal insulation material |
Thermostability high density chlorine formic acid foam insulator material |
||||
System wind pathround-robin mode | centrifugal fan-broadband enforce circulation | ||||
Refrigeration way | Single stage compression refrigeration | ||||
Refrigerator | whole sealing piston France Taikang brand Compressor | ||||
Freezing fluid |
R4O4A or USA Dupont environmental protection refrigerant(R23+R404) |
||||
Condensation way | forced air cooling or water-cooling | ||||
Heater | Nichrome heating wire heating | ||||
Humidifier | Semi-enclosed steam humidification | ||||
Water-provide way | full-automatic periodical feeding | ||||
Standard configuration |
1 Observe window(double-deck cavity toughened glass),1 50mm test hole in the left,1 PL inner chamber lamp,2clapboards, 1 bag of wet and dry bulb, 3 fuses, 1 power line. |
||||
Safety device |
Non- fuse-switch(compressor overload, refrigerant high low voltage, over-humidity and temperature protection,Protection switch,fuse stoppage warning system |
||||
Power | 1φ 220V AC±10% 50/60Hz 3φ 380V AC±10% 50/60Hz |
Contact Person: Victoria Li
Tel: +8613809275028
Fax: 86-769-28682030